Floor Finishing Products
Primers
Bona recommend using a Primer on the 1st coat, then applying 2 x coats of their waterborne lacquer especially when using Bona Mega or Traffic Lacquers.Bona Prime Classic is a one-component waterborne acrylate primer for use on wooden floors prior to over coating with Bona waterborne finishes. It gives the surface a well-bodied look and reduces the risk of side bonding. - Designed for use with all Bona waterborne finishes.
- High solids content.
- Well-bodied surface.
- Reduced risk of side bonding, i.e. especially suitable for endgrain floors, softwood plank floors and hardwood floors with under floor heating.
- Drying time: 1 to 2 hours at 20°C/60 % R.H.
- Application tool: Roller
- Application rate: up to 8–10 sqm/litre
Safety Data and Site Worksheets available on request. Pack size: 5 LitresPrice: £55.06 + 20% VAT )
Jenkins Joint FillerJenkins Solvent based Joint filler is an excellent product that is designed to fill the gaps between floor boards which, in turn, makes them draught-free and also dramatically improves the insulation in the room. It’s designed to fill gaps up to 5 mm across and also repair any minor defects found. Safety Data and Site Worksheets available on request. Prices:
1 litre: £16.43 + VAT
5 litre: £47.80 + VAT
2.5 Litre mixing bucket: £2.85 + VAT
Scraper: £4.32 + VAT
Reclaimed Pine Slivers StripsWe can supply packs of reclaimed pine sliver strips. They totally seal the gaps between the floorboords and as they are cut into a triangle shape they will fill a gap up to 8 mm across. They will insulate the floor stopping any draughts and save money on heating and will take stains, oil or lacquer finishes.
Easy to fitStep 1: Secure any loose floorboards and punch nail heads down 3–4mm. Clean between the gaps, be careful of any wiring or pipes. Step 2: Offer a sliver into gap to see how it sits. Remove it and run a line of our sliver glue down each side of the sliver. Step 3: Hammer down the sliver down the whole length of it the tighter the fit the better. Step 4: Run a sharp chisel along the length leveling the sliver flush to original floorboard height. Step 5: Continue in this way, filling in the gaps, hammering all the Slivers until the whole room is tight and filled. Leave it to dry for a minimum of 4 hours, ideally overnight if possible Step 6: Clean up the floor and start the floorsanding process with our professional sanding machines.
Various pack sizes available:
1 Meter x 6mm x 100 x slivers.
1 Meter x 8mm x 100 x slivers.
1 Meter x 6mm & 8mm ( 50 x each size )
Price: £54.00 ( plus 20% VAT ) per pack
1 Litre Wood Sliver glue ( approx 1 litre per 100 slivers )
Price: £7.95 ( plus 20% VAT )
32MM Wood Chisel
Price: £7.42 ( plus 20% VAT )
You can pre-order any additional tems to be dropped off with your floor sanding machine hire.
 Our Opening hours
Monday to Friday: 8.00 am - 5pm
Saturday: 8.00 am - 12.00 Noon
Sundays: Closed
Bank Holidays: Closed
Remember you can Book Online 24 hours a day. Please click on the button below to book online.
Book Now
|
